Automotive & Maintenance – Aerosols

ID #

Product Description


2447

ALL ABOUT: A unique aerosol foam which enables simple and easy clean up of tools, parts, workbenches, vent covers, machinery, coils, industrial equipment, concrete and more!


1401

ANTI-SEIZE: Extreme high temperature, extreme pressure lubricant and sealant. Prevents galling, seizing, pitting, fretting, corrosion and distortion of threading, keyed, splined and press fitted assemblies. Protects at sustained temperatures of up to 2100 degrees fahrenheit. Highly resistant to moisture, weather, chemical fumes, salt spray and stem. Allows tighter, more vibrant-proof seals using less torque while making disassembly easier. Use on: industrial machinery, construction, farm, mining and earthmoving equipment, marine hardware, vehicle fleets and assembly lines.


1402

BLISTERIZE: Paint and varnish remover with quick stripping action, scrape or flush off. A powerful clinging jet that quickly blisters lacquers, enamels, shellacs, and acrylics without attacking substrates such as wood, metal, masonry, stone or ceramics. Blistered paint can be scraped off or flushed away with water.


1403

CAR-B-GONE: Choke and carburetor cleaner. Cleans and frees: carburetor linkages heat risers PCV Systems, automatic choke adjustments, float and springs. An ultra high volatility formulation that dissolves carburetor deposits and fuel system contaminants such as gum, sludge and varnish. Helps improve fuel system performance and insure maximum fuel economy. Will not harm oxygen sensors or catalytic converters.


2449

CIRCUIT CARE IV: Contact cleaner. Non-flammable spray, dries fast, residue free. 26,000 volt dielectric strength. A purity, high dielectric, non-flammable spray specially formulated for removing oil, grease, condensation and other contaminants from sophisticated electronic parts.


1490

CLEAN SWEEP: Moisture free, non-flammable, non-abrasive, precision dusting. For use on camera lenses, scientific equipment, disk cartridges, timing devices and thousands of other pieces of equipment.


1484

DISSOLVE: Gel degreaser. Wipe on or flush off. Dissolves and removes grease, tar, asphalt. Environmentally safe, biodegradable, contains no petroleum distillates or chlorinated solvents. Non-acid, non-caustic, non-corrosive. Cuts through grease, oil, tar, road dirt and other materials. A heavy duty, industrial strength gel degreaser that clings to horizontal and vertical surfaces to control usage and avoid excess run off. Self indicating white gel turns color or soil to indicate solvent activity. Safe and effective for use on most surfaces.


1405

DRI-MOL: Moly-microfilm. An extreme range lubricant and anti-seize coating that withstands temperatures from -110 degrees f. to 1050 degrees f. Resists pressures up to 100,000 psi. Inert to water, oil, alkalies and many acids. Fast dry, oil free.


2421

EXTEND II: Self cleaning foam cleans and shines all vinyl, rubber and synthetic surfaces. Cures to a protective gloss in minutes with no buffing. Long lasting protection repels dirt, grime and salt. Protects against oxidation, discoloration and ozone deterioration. Contains no ozone depleting chemicals!


1407

FREE ALL: Penetrant, lubricant, demoisturant, protectant. A non-chlorinated non-flammable spray which penetrates, cleans, frees frozen fittings and never dries. This product displaces water and lubricates and has a 39,000 volt dielectric strength.


2431

GOTTA SHINE: Protects all automotive and marine finishes. Produces a deep, lustrous shine. Makes hand waxing fast and easy. Offers maximum gloss, durability and longevity. For use on autos, trucks, boats, RVs and machinery.


1409

GRIPPER: Non-chlorinated belt dressing. A powerful pin-point spray that can be safely applied to both sides of belts even while in motion. Treatment eliminates belt strippage, increasing equipment efficiency and lengthening belt life. Will not glaze and does not attract dust or dirt. Effective against indoor and outdoor environmental conditions.


1433

HANDI-FLUSH II: Coil and fin cleaner. Non-conductive, pleasant fragrance. A portable aerosol with heavy flush spray, quickly cuts through grease and lint to restore proper airflow and increase condenser efficiency.


1494

HANDY II: Brake parts cleaner. Removes grease, dirt, fluid and oil from linings, pads and drums. Not necessary to disassemble brake unit, useful on linings, disc pads, drums, cylinders, springs and clutches.


2404

HIT & RUN II: Foaming coil cleaner. Specially formulated to remove mold/fungus stains and odors. No harsh chemicals, biodegradable, non acid, and non caustic.


1412

INSTA ZINC: Cold galvanizing spray. Rust proofs metal, prevents rust creepage. Provides a zinc film on metal surfaces that seals out moisture and prevents corrosion by sacrificial galvanic action. It is highly resistant to water, acid and salt atmospheres.


1414

KOOL KUT: Cutting fluid and coolant. Formulated for all types of machine shop uses. This high performance coolant/lubricant increases production, protects tools, helps provide quality machine parts. This is a heavy-duty concentrated cutting oil fortified with added active sulphur and an extreme pressure additive.


2413

LUBRA-GEL II: Penetrating lubricant gel with TEFLON. A high tack, clear, lubricating gel. Non chlorinated, water resistant, effective in extreme temperatures, burnishes Teflon coating into working parts.


2410

MAX: Tool lubricant. For electric, air powered and manual tools. Eliminates calcium build up from moisture in air lines. Dissolves sludge, dirt, and dust accumulation, lubricates and protects all moving parts.


1416

MELTZ: Spray de-icer. Quickly dissolves ice, frost and snow. Thaws frosted windshields, windows and frozen locks.


1404

NEUTRA-PRIME: Chemically neutralizes rust and leaves a tough, long term, rust preventative coating. Seals, protects and prolongs the life of ferrous metal. Rusted area turns to a black protective finish. Paintable.


2480

NO DOUBT: Penetrant, Lubricant, Demoisturant, Protectant-Dielectric Strength: 38,000 volts


1473

NO FLASH II: Safety solvent. Safe on energized electrical equipment. Totally non flammable, ozone safe, fast drying, powerful flushing action, no petroleum distillates, 36,200 volt dielectric strength.


1408

OGL II: Gear and chain lubricant. Has long lasting characteristics for outdoor use. Ideally suited for the construction industry on areas such as cranes, hoists, cables and gears. Holds up under water. High pressure and extreme temperature resistance.


1478

PRO-TEKT: Skin shield with aloe vera. Forms an invisible protective film on hands, arms, legs or other exposed skin areas. For protection of skin against irritation from harsh chemicals, fiberglass fibers, paints and dyes, resins, epoxies, inks.


1436

R5/D1: Expanding foam sealant. Seals bonds, insulates, weather-proofs, dampens sound, and contains flame retardant. Seals out Radon gas. 1″ thickness yields R-5 insulating factor. Insulation sealant for boats, RV’s, air conditioning, refrigeration, plumbing, electrical, carpentry, dampens sound in autos and vans.


1420

RED GREASE: Penetrating liquid lubricant. Air cures to a high temperature high pressure grease. Will not run or liquefy under heat. Not washed away by water or steam. Lubricates in the presence of water. Withstands heavy loads and high impact. Displaces old and contaminated lubricant. Holds up under extreme temperatures (-40F to +500F)


1421

RENU I (WHITE): Acoustical tile renovator. Makes old or stained tiles like new. Does not affect acoustic properties. Coating is non flammable when dry and does not change the fire rating of the tile to which it has been applied.


2483

RHINO: Easy to apply; Black, durable, flexible rubberized coating which creates a water-tight film.


1475

RUST FREE: Penetrating lubricant. Penetrates and dissolves rust and corrosion. Excellent creep characteristics. Dispersed in this unique product are two powders with superior lubricating properties. The Moly (Molybdenum Disulfide) and the T.F.E. (Tetrafluoroethylene) powders are carried in a petroleum solvent deep inside parts where lubrication is needed. Once deposited they actually burnish themselves into metal parts to provide excellent pressure and temperature resistance as well as reducing friction and wear.


2477

S.O.S.: Excellent spray on pipe thread sealer.


1426

SLIX: Silicon spray. Lubricates, waterproofs. For auto, home and industry. Non-chlorinated. Stops sticking or drawers, windows, doors, screens, zippers, and locks.


1437

SOLV-IT: Natural cleaner and degreaser. Industrial strength, no chlorinated solvents or petroleum distillates. The safest alternative to using chlorinated solvents for degreasing and cleaning metal surfaces. High pressure spray penetrates, loosens and lifts soil away. parts can be air dried or rinsed clean with water.


1480

STEEL JACKET: Stainless steel coating. A super tough coating containing stainless steel pigment and an ultra durable polyurethane binder. Protects metal, wood, ceramics and leather from corrosion and deterioration caused by harsh chemicals, severe weather or abrasion. Dries in fifteen minutes, hardens overnight, cures to optimum strength after several days. Will not darken or oxidize.


2482

STICK M IV: Adhesive spray for general purpose bonding on a variety of surfaces. Works extremely well on paper, cloth, cardboard, felt, foam rubber and most plastics and glass. Creates a water resistant bond offering quick tack, non-wrinkling and flexibility.


1428

TEF LUBE II: Non chlorinated, non hexine dry Teflon lubricant and release agent. Chemically inert formula. Odorless, stainless that is more slippery than silicone, graphite or oil. Excellent for reducing low speed friction. The dry film is not affected by most chemicals and when used as a release agent, allows parts to be painted without cleaning. Resists temperatures from -100F to +500F.


2479

TRIPLE C: Clear PVC cement.


2478

TRIPLE P: Purple PVC primer.


1431

VANDALISM: Mark remover. A gel-type cleansing foam for removing all kinds of graffiti from hard surfaces such as glazed and unglazed tile, oil-based painted surfaces, baked enamel, ceramic, metal and fiberglass.


1492

WEATHERMAN: Metal parts protector. Non-chlorinated. Long-term corrosion preventative. Flexible dust-retardant coating. Coating will not crack, peel flake or check over a wide temperature range (-40F to 175F).



ABOUT US

With Select you can be confident that you are getting the right product for your specific need. We encourage you to experience the difference that a devoted team-oriented company such as Select can make for you and your business.

LEARN MORE

AFFILIATIONS

REQUEST INFORMATION